How do you reverse the door on a Whirlpool refrigerator?
Matthew Alvarez
Updated on May 01, 2026
Unplug the ice maker or disconnect power. Remove the handle screws and handle (on some models). Remove the hinge pin from the top hinge. Remove the door from the hinges and replace the top hinge pin.
Subsequently, one may also ask, can refrigerator doors be reversed?
It's important to remember that your refrigerator door can be reversed at any time. That means that even an older refrigerator can usually be reconfigured for your space.
Secondly, how do you adjust the doors on a Whirlpool refrigerator? Raise the door by turning the alignment screw counterclockwise with a 5/16-inch open-ended or adjustable wrench, and lower the door by turning the alignment screw clockwise. Keep adjusting by small amounts until both doors are centered in the openings, and the tops are level with each other.
Besides, can you reverse door on Whirlpool washer?
Front-load washers have the hinge on the left side of the door and open to the left only. They do not have reversible doors because of the electronics involved with the door lock mechanism. Note: Door swing is approximately 150-160 degrees.
How do you change a door swing?
To keep the door swinging in the right direction you don't need to change the doorstop. Just change it from left- to right-hand swing or vice versa. Open the door. Use a cordless screw gun to unscrew the hinges from the door jamb, allowing the door to drop away from the jamb.
Related Question Answers
How do you reverse the door handle on an Amana refrigerator?
Reverse doors by performing the following steps: Remove plugs and screws in opposite side of refrigerator cabinet. Insert in holes left from hinge removal. Mount bottom, center, and top hinges with shims on opposite side of cabinet. Replace bottom hinge on opposite side of cabinet.How do you reverse a Magic Chef mini refrigerator door?
CHANGING THE REVERSIBLE DOOR- Remove the hinge cover on the right top of the. cabinet.
- Remove the two screws (using a ratchet tool. with a 7/16" socket) that hold the top hinge to.
- Lift the top hinge straight up to free the pin from.
- Lift the door and place it on a padded surface to.
- Remove the plug buttons from the upper left.